Home Hardware Center
Currently shopping at Natchez
PPG 90-453/01
Pitt-Tech® satin industrial enamels are a full line of 100% acrylic water borne enamels designed for direct to metal application. These products provide corrosion protection, chemical and solvent resistance and are fast-drying with low-odor. Recommended for use on properly prepared interior or exterior metal, masonry, plaster and drywall surfaces.
| Net Content | : | 1 gal |
| Odor/Scent | : | Characteristic |
| Color | : | Black |
| Sheen | : | Satin |
| Compositions | : | Talc, Not Containing Asbestiform Fibers, 2-(2-Methoxyethoxy)Ethanol, Carbon Black |
| Specific Gravity | : | 1.07 |
| Flash Point | : | >200 deg F |
| VOC Content | : | 227 g/L |
| Density | : | 8.93 lb/gal |
| Viscosity | : | <21 cSt |
| Thinners | : | Tap Water |
| Resists | : | Rust, Scrub |
| Vehicle Type | : | Acrylic |
| Application Method | : | Brush, Roller, Spray |
| Applicable Materials | : | Aluminum, Ferrous Metal, Galvanized Steel |
| Resin Type | : | Acrylic Latex |
| Drying Time | : | 40 min to 2.5 hr |
| Boiling Point | : | >100 deg F |
| Application Temperature | : | 50 to 120 deg F |
| Flammability Rating | : | 1 |
| Chemical Base | : | Latex |
- Improved color and gloss retention versus most alkyds, water-base and two-component systems
- High-hiding
- Easy to apply, low-odor
- Excellent adhesion for true DTM performance
- Waterborne acrylic enamel, washable
- Soap and water clean-up
Catalog